Middle Atlantic Custom Rack Shelves
Rack mount your non-rackable equipment, without unsightly gaps.
Custom rack mounts are more than shelves. They bring your unit up to the next
full rack space, and prevent it from sliding back with rear brackets. Custom
cut-outs are made for your equipment, and the complete shelf is shipped to you
in two to three weeks. Many patterns are already on file,so call us to review.
Some assembly is required. These shelves accept units up to 17-3/8" wide.
|
Brushed and Black Anodized Aluminum |
61MARSH4A |
|
|
Textured Black Enamel on Steel |
61MARSH4S |
Raxxess Secure Rack Storage
Store and secure tapes, tools, CD’s, and detritus that can clutter
up your life. The Rak-Vault is a steel,
rack-mount enclosure with a hinged front panel and keyed lock. Black, baked enamel finish. 9" deep.
|
RKV-3 (5-1/4" high) |
61RX3V |
||
|
RKV-4 (7" high) |
61RX4V |
Middle Atlantic Rack Rails
Our best 1/8" thick galvanized steel rails are punched and
tapped for 10-32 screws. Side mounting holes are 9/32" diameter. Sold in
pairs. Shorter lengths available.
|
8 Spaces (14") |
61MARRF8 |
|
|
10 Spaces (17-1/2") |
61MARRF10 |
|
|
12 Spaces (21") |
61MARRF12 |
|
|
14 Spaces (24-1/2") |
61MARRF14 |
|
|
16 Spaces (28") |
61MARRF16 |
|
|
18 Spaces (31-1/2") |
61MARRF18 |
|
|
21 Spaces (36-3/4") |
61MARRF21 |
|
|
27 Spaces (47-1/4") |
61MARRF27 |
|
|
45 Spaces (78-3/4") |
61MARRF45 |
SKB’s Nut Retainer Clips
These make life so much easier when you’re mounting things in a
rack. They clip onto your rail so you have one less thing to hold. Bag of
12.
SKB Rack Pack 77SK19AC1
Middle Atlantic Rear Hanging Bracket
To support amps and other gear with rear ears. Each is a pair.
|
RH-2 2 Space |
61MARH2 |
|
|
RH-3 3 Space |
61MARH3 |
|
|
RH-4 4 Space |
61MARH4 |
Plexiglas Security Covers
A lightly smoked Plexiglas door protects your equipment behind a
keylock. Depth of covers is 1 1/2".
|
2 Spaces |
61MASECL2 |
|
|
4 Spaces |
61MASECL4 |
|
|
8 Spaces |
61MASECL8 |
Sliding Shelves
The SSL is a new, low-profile sliding shelf that occupies one rack
space and provides a black laminate slide-out surface with positive lockout and
11" reach. It supports up to 35 pounds. The universal telescopic rear
support fits all racks. The popular SS
version holds up to 50 pounds, extends 14", and now latches
in both open and closed positions. The SS occupies slightly more than one rack
space, usually not a problem due to the equipment being placed on top.
|
SSL |
61MASSL |
|
|
SS |
61MASS |
UCP Punched Panels
Design and assemble your own custom panels out of stock modules.
The completed panels look professional with no gaps; all hardware is flush, and all visible parts have an aesthetic
brushed and black anodized finish.
Frame kits bolt to their ears with included hardware; then you fit
up to five modules across a two-rack-space frame, or ten modules in a four
space frame, or 15 modules in a six spacer. Modules are prepunched for your
choice of connectors. Middle Atlantic has a hundred modules with cutouts for
XLR, data multipin, phone, BNC, RCA, LEDs, duplex receptacles, twistlocks, and
many specialty types of connectors. These are just a sample.
|
All Punched UCP’s |
NPN |
|
|
The
UCP-CH Chassis (fits UCP modules on front and rear) |
61MAUCPCH |
|
|
Adapt any single UCP Module to a standard 1900 electrical box |
61MAUCPADP |
Security Covers
Ideal for providing both security and protection, these perforated
steel covers are 1" deep and allow easy viewing of control settings. Screw
notches let you remove them without unmounting the gear. Use with tamper-proof
screws.
|
1 Space |
61MAS1 |
|
|
2 Spaces |
61MAS2 |
|
|
3 Spaces |
61MAS3 |
Desktop Rack Rails
Quickly and expensively organize desktop processing and test
equipment with the new Desktop Rack Rails from Middle Atlantic. Available in 8 and 12 space sizes, both
models extend upward at a gentle slope.
|
8 Space Desktop Rack Rail |
61MADR8
|
|
12 Space Desktop Rack Rail |
61MADR12
|
Blank Panels
Our best selling blank panels, flanged for strength and made of
black brushed and anodized aluminum.
Easy to machine.
|
1 Space |
61MABL1 |
|
|
2 Spaces |
61MABL2 |
|
|
3 Spaces |
61MABL3 |
|
|
4 Spaces |
61MABL4 |
The Rack Ruler
We love it. This steel tape measure with belt clip pulls out to
eight feet and is incremented in both rack spaces and inches. Bonus: the back
of the tape has great formulas and engineering info.
|
Rack Ruler |
61MARULER |
Econo-Blanks
They’re now flanged for strength. Black powder coat on steel. Less
expensive but heavier to ship. Need a
lot? Save with master packs.
|
EB-1 |
1 Space |
61MAEB1 |
|
|
EB-2 |
2 Spaces |
61MAEB2 |
|
|
EB-3 |
3 Spaces |
61MAEB3 |
|
|
EB-4 |
4 Spaces |
61MAEB4 |
|
|
EB-5 |
5 Spaces |
61MAEB5 |
|
|
EB-6 |
6 Spaces |
61MAEB6 |
|
|
EB-1 Master Pack (50) |
|
61MAEB1MP |
|
|
EB-2 Master Pack (25) |
|
61MAEB2MP |
Half Rack Universal Shelf
Mount one or two half-rack devices horizontally in one rack space.
Mounting hardware is included and the shelf is drilled with universal holes.
10" deep. Need lots? Ask about the 50-piece master pack.
Universal Shelf 61MAUTR1 $19.95
Vent Panels
Middle Atlantic’s 16 gauge steel panels have one piece construction
and are perforated with 5/32"
diameter holes
yielding 68% open area.
|
1 Space |
61MAVT1 |
|
|
2 Spaces |
61MAVT2 |
|
|
3 Spaces |
61MAVT3 |
|
|
4 Spaces |
61MAVT4 |
|
|
6 Spaces |
61MAVT6 |
Rack Chassis
For your custom electronics. Flush face is easily removed for
punching and the rear panel is full height and removable. Face and rear are
black anodized aluminum, while the top, bottom, and sides are steel. These
chassis are 10" deep and ship assembled.
|
1 Space |
61MACH1 |
|
|
2 Spaces |
61MACH2 |
|
|
3 Spaces |
61MACH3 |
KD Shelves
KD means knock-down. When you disassemble them, you save on shipping.
Flush studs are provided with bottoms for easy assembly. KD shelves are 16
gauge steel painted with black baked enamel, and can be used with equipment up
to 17-3/8" wide. Ears come packaged in pairs. Call for extra-tall ears and
extra-deep bottoms.
Important: For a complete shelf, purchase both a bottom section
and a set of ears.
|
Bottom Section, 15-1/2" Deep |
61MAKDB |
|
|
Matching Ears, 3-1/2" Tall |
61MAKDE2 |
|
|
Matching Ears, 5-1/4" Tall |
61MAKDE3 |
|
|
Matching Ears, 7" Tall |
61MAKDE4 |
|
|
Matching Ears, 8-3/4" Tall |
61MAKDE5 |
|
|
Matching Ears, 10-1/2" Tall |
61MAKDE6 |
|
|
Matching Ears, 12-1/4" Tall |
61MAKDE7 |
Rack Drawers
. Enclosed top
. Ball bearing slides
extend 14"
. Flush slam
latch keeps drawer closed
. Keylock
option is factory installed
. Storage
height is 1/2" less than racking height
.
Models shown are
anodized aluminum. Steel models available
. Ask about partitions for CD, DAT, LP, Cassette, VHS
|
2 Spaces |
61MAD2 |
|
|
2 Spaces w/Lock |
61MAD2LK |
|
|
3 Spaces |
61MAD3 |
|
|
3 Spaces w/Lock |
61MAD3LK |
|
|
4 Spaces |
61MAD4 |
|
|
4 Spaces w/Lock |
61MAD4LK |
Fans and Fan Panels
Three-space fan panels include grills and are punched for
4-1/2" diameter fans. The quiet, 100 CFM fans, sold separately, are
designed for long life. Line cord supplied; user must install plug. Black
anodized aluminum shown; also available in steel with black enamel.
|
Panel for 1 Fan |
61MAFP1 |
|
|
Panel for 2 Fans |
61MAFP2 |
|
|
Panel for 3 Fans |
61MAFP3 |
|
|
Fan |
61MAFAN |
|
|
Fan Guard |
61MAGUARD |
Filter Kit with washable filter keeps dust out of your gear.
Can be fit over fan panels or used alone. Three RU.
61MAFILTER
Rack Hardware
Each package contains 10-32 x 3/4" black machine screws and
flat nylon
washers. Choose Phillips, square drive, or a special tamper-proof
star post for security. Phillips hardware is
now heat treated to reduce stripping, and is available in a master
pack.
|
Phillips 100 ea |
61MAHP |
|
|
Master Pack (50 bags of 100) |
61MAHPMP |
|
|
Star Post Screws 50 ea |
61MAHTX |
|
|
Star Post for above |
61MATBIT |
|
|
Square Drive 100 ea |
61MAHS |
|
|
Square Drive for above |
61MASBIT |
Shoulder washers are non-conductive and are used with standard
washers to isolate equipment from the rails.
Shoulder Washer 100 ea 61MASW
Rack Shelves
Quick and easy rack mounting in one, two, or three spaces. Steel
is 16 gauge with durable black powder coat finish. Depths: 11" for U1, and
14-3/4" for U2 and U3. Inside left to right dimension on all shelves is 17
3/8". Need a lot of shelves?
Ask about a master pack.
|
One Space, Holds 35 lbs |
61MAU1 |
|
|
Two Space, Holds 50 lbs |
61MAU2 |
|
|
Three Space, Holds 85 lbs |
61MAU3 |
Clamping Rack Shelves
Adjustable rubber-lined clamps secure your unit from the top, “L”
brackets grab it from the rear. Steel construction, vented bottom. These sizes
are one-piece with 14-3/4" depth. Taller, knock-down models are available.
|
2RU |
61MARC2 |
|
|
3RU |
61MARC3 |
|
|
4RU |
61MARC4 |