Sony MDR Series Headphones


The industry standard in low-cost headphones, Sony’s MDR-7506!  The MDR-7506 features a closed-ear design for reduction of external interference and a stereo UniMatch plug, which allows use in both 1/4" and 1/8" applications. The clever collapsible design means they’re easy to take with you! 

Featured is the MDR-V700DJ headphone, which has a swivel earcup for easy single-sided monitoring, a must for DJ’s.  Like the MDR-7506, the MDR-V700DJ folds to make storage easier.  

Not pictured:  the MDR-7505 monitor headphones are for DJ and remix use with a swivel earcup and the MDR-7502 is a cost effective closed-ear design headphone.  Both headphones have 1/4" and 1/8" UniMatch plugs.

 

Call for price on Sony Products 

Fostex T-20RP

From Fostex, the T-20RP headsets with Regulated Phase offer excellent quality. Used by professionals on stage & in studios the world over the T-20RP offers the finest quality audio reproduction.  Impedance 50ohms, Sensitivity 96dB/mW, Freq Response 20Hz-30kHz, Max Input Level -200mW

T-20RP     60FOT20RP       

Call 1-800-732-7665 for Your Best Bradley price

 

 

Raxxess Headphone Hanger

Just replace any screw in your rack with this ingenious device, and you can hang your headphones in a place where they’ll always be accessible and protected. 

61RXHH1                $8.95

 

 

Koss TD61

 

This economical, yet rugged headphone is ideal for budget requirements.  Frequency response is an impressive 20-20,000Hz  and Koss’ “ no questions asked” lifetime warranty adds even more value to your purchase.  Includes 8 foot straight cord with 1/8"-1/4" stereo adapter.

TD61       60KOTD61             

Call 1-800-732-7665 for Your Best Bradley price

 

 

 

Beyer DT250

The DT250 from Beyer is a lightweight, closed-ear dynamic headphone, specifically designed for studio applications. It features an efficient neodymium magnet system, very high reproduction precision and balanced sound.  

DT25080                

 

 

 

 

 

 

 

 

 

 

LIGHTING & POWER

 

Littlite Lamps

Littlite makes: yes: little lights. Illuminate the dark corners of your job.

The popular L-3 Series has a mounting base with attached gooseneck, a dimmer, and a high intensity tungsten-halogen bulb in a finned hood. The L-2 Series has a mounting base with attached gooseneck, dimmer, and a low intensity incandescent bulb in an unobtrusive tubular hood. Optional AC adapter is a 120V transformer. Euro transformer also available.

 

L-3 Series, 12"

61LL312A

$49.00

with AC adapter

61LL312

L-3 Series, 18"

61LL318A

$49.00

with AC adapter

61LL318

L-2 Series, 12"

61LL212A

$39.00

with AC adapter

61LL212

L-2 Series, 18"

61LL218A

$39.00

with AC adapter

61LL218

 

 

The G Series has a swivel BNC-style connector, useful in applications requiring easy removal. They mate with panel sockets on your equipment. 

 

G-Series, 12"

61LL12G

G-Series, 12" High Intensity

61LL12GHI

G-Series, 18"

61LL18G

G-Series, 18" High Intensity

61LL18GHI

 

The X Series has a 3-pin male XLR connector with isolated lamp circuit. Useful where a detachable, non-swiveling connection is desired.   

 

X-Series, 12"

61LL12X

X-Series,  12" High Intensity

61LL12XHI

X-Series,  18"

61LL18X

X-Series, 18" High Intensity

61LL18XHI

 

Spare Bulbs

Q5 High Intensity Bulb

61LLQ5

1815 Low Intensity Bulb

61LL1815

 

ETA Conditioned Power Distribution

The “PD” Conditioned Power Distribution Series from ETA easily deals with normal AC line power fluctuations as well as the more drastic abnormalities of the spike and surge variety. Also, filtering of airborne interference caused by electromagnetic and radio frequency transmissions is routinely accomplished. More sophisticated ETA models utilize microprocessor technology to regulate AC power and sequence power turn-on to reduce high in-rushes of power. Our most popular models are listed below.  Call for other power requirements.

 

PD8 8 U-grounded Edison AC outlets    

 

PD8L same as PD8 plus dual retractable rack illuminators, high/low on/off switch

 

 

PD9L 9 U-grounded protected AC outlets (1 “always on” front, 8 back) to accommodate up to 7 UL approved voltage converters (wall warts), dual retractable rack illuminators, high/low on/off switch           

 

PD9LV same as PD9L plus L.E.D. voltmeter          

 

Call 1-800-732-7665 for Your Best Bradley price

Furman Power Products

 

Lower your noise floor and stop lifting grounds, too. The Furman Isolation Transformer will change the way you look at studio hum problems. Designed for critical, low-noise installations, the IT1220 can supply 20 amps of balanced AC power. The goal: drastically reduce hum and buzz caused by ground currents from power supply filtering and by radiation from supply cables into sensitive signal sources. You can install it yourself for clean, safe power. It typically gives a 16dB improvement in background noise floor in systemwide installations. This 3RU chassis has 12 isolated outlets on the back and two more on the front. 

 

 

Call 1-800-732-7665 for Your Best Bradley price

 

 

Furman’s PL-Plus has eight switched outlets, a ten foot power cord, a front panel LED voltage monitor, and RF  filtering. Protect your gear from spikes and surges. Outlets are rated at 15 amps. The two slide-out lamps have a dimmer control. The PM-8 has the power conditioning features of the PL-Plus, without lights, but adds an AC ammeter and front-panel unswitched outlet.

Call 1-800-732-7665 for Your Best Bradley price

 

AR-PRO is a 30 amp line voltage regulator for use overseas and at home. Supply clean, regulated power for an entire studio or stage.

It delivers 120V AC with capture ranges of 88 to 134 volts and 172 to 264 volts, 50/60 Hz. Because the AR-PRO works automatically,it can protect against a catastrophic error.  Includes fourteen regulated, conditioned outlets, input voltmeter, output ammeter, and adjustable rack ears.  Height: 3.5".

Call 1-800-732-7665 for Your Best Bradley price

 

 

AR-1215  

AC line voltage regulator protects equipment from problems caused by brownouts and overvoltages.  It accepts voltages from 97 to 141 volts, and converts them to US standard 117 volts. The “J” version of the AR-1215 provides switch selectable 100VAC output. Input capacity 15 amps; output 12 to 15 amps. Unit instantly shuts down to protect your gear should an extreme overvoltage situation occur.

Call 1-800-732-7665 for Your Best Bradley price

 

 

 

 

Samson PowerBrite

Because it does so much in a single rack space, the PowerBrite Pro is exceptionally useful for any rack. Its large, easy-to-read front panel metering system includes a 10-segment voltmeter to ensure incoming voltage is

within range of the unit’s operating parameters. A 10-segment current meter warns when the unit is approaching circuit breaker disconnect status. The light tray has a silent fluorescent light that clearly illuminates everything in the rack. Individual logos can be customized for the front panel inlay. 15 amp circuit breaker; rear-panel mini-XLR jack & switch for connecting supplied gooseneck lamp.

Call 1-800-732-7665 for Your Best Bradley price