Whirlwind MD-1 Portable Mic-to-Line Driver

The Whirlwind MD-1 combines a high quality mic/line input stage with a transformer-isolated line driver and independent headphone amplifier. Ideal for boom, parabolic and interview mics, the MD-1 provides phantom power, local monitoring, and a line-level balanced output for noise immunity over long cable runs.
Housed in a rugged steel chassis, the MD-1 comes with a belt clip and is powered by two 9V batteries. The MD-1’s input stage features a level control with a 40dB range and a MIC/LINE input level switch, plus switchable 18V phantom power for condenser mics. The MD-1’s output can be switch selected between the isolated gain stage and a straight loop-through.     The headphone volume control provides a 60dB range of adjustment to the post-transformer input signal or to signals inserted at the headphone Line-In jack. The MD-1 is an ideal general- purpose audio signal test and amplifier tool for the broadcast or production equipment box. It’s another great audio problem solver from Whirlwind.

Whirlwind Medusa Press Boxes     

Here come the wolves in the press pack! But you’re ready for them with your Medusa Press Box. The Press Box accepts a single line-level signal and gives you multiple mic- level 150 ohm output feeds. Designed to hold up under severe treatment, Whirlwind’s cold-rolled steel boxes are on the job in punishing environments everywhere.

Whirlwind Pressmite
Got a smaller event to cover? The PressMite is a compact high performance press feed distribution box  with 12 mic and 2 line outputs (all transformer isolated). It features a mic/line input with adjustable gain and a built-in headphone amp, and runs on two standard 9V batteries.

Pressmite              61WHPM                    $809.00